What is Zirconium Silicide ZrSi2 Powder?

Introduction to Zirconium Silicide ZiSi2pulver


Zirconium silicide

ZrSi2, an rhombic, steel-gray glossy crystal with a relative density of 4.8822 has been identified. Zirconium Siicide can’t be dissolved or soluble with water, organic acid or any other liquid. It can, however be hydrofluoric.

Physical characteristics zirconium siicide powder ZrSi2


ZrSi2 Intermetallic Compound ZrSi2 also known as zirconium silica, ZrSi2 is a high-hardness ceramic that has high melt temperatures and heat conductivity. ZrSi2 is a highly corrosive medium that can be utilized due to its outstanding chemical and physical characteristics.

Zirconium siicide ZrSi2 tissue properties
Additional Names	zirconium(IV) silicide, zirconium disilicide, ZrSi2 powder
No.	12039-90-6
Formula compound	ZrSi2
Molecular Weight	147.4
Appearance	gray black powder
Melting Point	N/A
Boiling Point	N/A
Density	4.88g/cm3
Water solubility	It’s impossible to solve.
Mass exact	145.858557

Zirconium Silicide Zi2 Pulver


You can convert silica to zirconium by heating it under high isolation.

Follow these steps to create zirconium Silicide Nanomaterial.

1. You can seal a 20ml stainless-steel autoclave with 5mmol Zirconia powder, 5mmol Silica powder, and 50mmol Lithium. An electric furnace can be used to heat the autoclave. Set the furnace to heat at 10°/hour. You should turn the furnace on until it attains 600 degrees Fahrenheit. After the reaction has completed at room temperature the autoclave will automatically open. The product will then cool and evaporate.

2. To make zirconium Silicide Nanomaterials the 60 pieces had to be washed in distilled water and dried for four hours in an oven. This is determined by both the quality and quality of preparations. Zirconium siliicide yielded 85 percent.

Zirconium Silicide Zi2 Pulver


ZrSi2 ceramic material can be used to make semiconductor films, crucibles or other ceramic types.

Zr Zirconium is used for many purposes


Zircon can also be used for ceramic glazes or white pigment impervious. Zircon’s most widespread use is as a refractory. It is used to produce firebricks and other forms for the steel or glass industries. Because of its high melting temperatures (22200), zircalite can be used to cast sand and grind flour in low-quality areas. Zirconium is increasingly being used in this area. You can also use zirconium to make zirconium metallics or zirconium chemicals.

Zirconium Siicide ZirSi2 ZirSi2 powder principallieferant


Nano Technology Co. Ltd., a supplier of quality chemicals is internationally recognized.

High-quality, high-quality merchandise is what you want

zirconium silicide ZrSi2 dust

For more information, please send us an email. (brad@ihpa.net)