How do you define it?
Titanium Carbide
?
TiC has the chemical formula, while its molecular mass is 59.89. Gray metallic, cubic lattice solid. The melting point, boiling point, and relative density are 3140+-90 and 4820 respectively. A hardness greater than 9 is possible. Water is insoluble, but it can be broken down by nitric acid or aqua regia. It can react with pure oxygen at 1150degC and is therefore stable in air below 800 degC. Produced method: This mixture of titanium and carbon is made by reacting TiO2 with hydrogen at high temperature. Or TiO2 can be mixed with carbon and press it into a block. After heating to 2300-2700 degrees C using an electric furnace, the carbon will be carbonized in CO or H2 oxygen and then removed. It is also useful as an electrode and abrasive in arc lamps.
Titanium Carbide: The Characteristics
It’s stable at low temperatures (less than 800 degC) and can slowly be oxidized by 800 degC. Powdered TiC can then be burned in O2 at 600 degrees C to produce TiO2 and carbon dioxide. If it rises above 2000°C, it will be eroded by the air. However, pure O2 at 1150°C can react to create TiO2 [3] and CO. If heated it can interact easily with nitrogen, oxygen, and halogen. Molten alkali reacts and slowly decomposes when heated to 1500°C in H2Chemicalbookgas. Mixes titanium carbonitride with N2 gas at above 1200degC. Although it does not react to water, it can react with water vapour at high temperatures (700°C) to create TiO2, H2 and CO. This does not interact or react with carbon, but can react at 1200 degrees Celsius with CO2 to create TiO2 (and CO)
Titanium Carbide: What are its uses?
1. This is useful in making cutting tools, wear-resistant coats, mold production, and metal crucibles to smelt metal, among many other areas.
2. Raw materials to produce ceramics in powder metallurgy, including wire drawing films and cemented caride molds. Multiphase ceramics may be used to make hard knives and military armor materials.
3. You can use it as a coating material to make diamond coatings, anti-tritium fusion coatings, electric contact coatings and excavator pick coats. It is also used for making infrared radiation ceramic materials as well as foam ceramics.
The principal supplier Titanium Carbide
Advanced material Tech Co., Ltd. is a professional caride powder supplier Over 12 years’ experience in developing and researching chemical products. You can pay by Credit Card, T/T or West Union. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.
You can find high-quality, high-quality boron carbonide powder here Please contact us You can also send us an enquiry
Titanium Carbide: The Characteristics
It’s stable at low temperatures (less than 800 degC) and can slowly be oxidized by 800 degC. Powdered TiC can then be burned in O2 at 600 degrees C to produce TiO2 and carbon dioxide. If it rises above 2000°C, it will be eroded by the air. However, pure O2 at 1150°C can react to create TiO2 [3] and CO. If heated it can interact easily with nitrogen, oxygen, and halogen. Molten alkali reacts and slowly decomposes when heated to 1500°C in H2Chemicalbookgas. Mixes titanium carbonitride with N2 gas at above 1200degC. Although it does not react to water, it can react with water vapour at high temperatures (700°C) to create TiO2, H2 and CO. This does not interact or react with carbon, but can react at 1200 degrees Celsius with CO2 to create TiO2 (and CO)
| Titanium Carbide Properties | |
| Other Titles | titanium(IV) carbide, TiC powder |
| 12070-08-5 | |
| Compound Formula | TiC |
| Molecular Weight | 40.1 |
| Appearance | Black Powder |
| Melting Point | 3160 degC |
| Boiling Point | 4820 degC |
| Density | 4.93 g/cm3 |
| Solubility of H2O | N/A |
| Exact | 59.947946 |
Titanium Carbide TIC Powder CAS 1212070-08-5
1. This is useful in making cutting tools, wear-resistant coats, mold production, and metal crucibles to smelt metal, among many other areas.
2. Raw materials to produce ceramics in powder metallurgy, including wire drawing films and cemented caride molds. Multiphase ceramics may be used to make hard knives and military armor materials.
3. You can use it as a coating material to make diamond coatings, anti-tritium fusion coatings, electric contact coatings and excavator pick coats. It is also used for making infrared radiation ceramic materials as well as foam ceramics.
The principal supplier Titanium Carbide
Advanced material Tech Co., Ltd. is a professional caride powder supplier Over 12 years’ experience in developing and researching chemical products. You can pay by Credit Card, T/T or West Union. Trunnano ships goods by FedEx or DHL to overseas customers by air and sea.
You can find high-quality, high-quality boron carbonide powder here Please contact us You can also send us an enquiry
Inquiry us