High Purity Tungsten Carbide WC Powder Cas 12070-12-1, 99% |

About Tungsten Carbide WC Powder:



Tungsten carbide

is made of both tungsten or carbon.

Tungsten carbide formula

Is the WC?

Tungsten carbide


molecular Weight

It is 195.85


Tungsten carbide color:

Although the most basic form is tungsten carbide in fine grey powder, it can still be used to make jewelry, cutting tools and armor-piercing rounds.

Young’s modulus, which measures 530-700 GPa (77,000-102,000 ksi), is approximately twice as stiff than steel. It is also twice as dense and nearly equal to lead or gold. Its hardness is almost the same as that of corundum, a-Al2O3. Only diamond powder and cubic boron Nitride can be used to polish and finish.

Tungsten caride can be also used in the production of

tungsten carbide rings

,

tungsten carbide mens rings

,

tungsten carbide wedding bands

,

tungsten carbide mens wedding bands,

etc. Because

tungsten carbide rings price

It’s cheaper than gold and platinum rings. Tungsten carbide is also more scratch resistant than any metal. There are many styles and colors available.

black tungsten carbide rings

,

tungsten carbide rings gold

.

Black tungsten carbide

This hexagonal crystal has metallic luster, hardness and a similar appearance to diamonds. Tungsten carbide is an excellent conductor of heat and electricity. Tungsten carbide can’t be dissolve in water or hydrochloric and sulfuric acids. However, it is easily soluble and dissolves in hydrofluoric and nitric acids. Tungsten carbide in its pure form is very fragile. However, if there are small amounts of cobalt, titanium and other metals, it can be made less brittle. Tungsten carbide can be used to cut steel. To increase its anti-knock capability, it is sometimes combined with titanium carbide (or tantalum) or their mix. Tungsten carbide has a chemical stability. Tungsten powder can be used for cemented carbide production.

To receive the most current information, send us an inquiry

The price for tungsten carbide

Please fill out the form below if you wish to

buy tungsten carbide

Get powder in bulk

Tungsten carbide powder for WC performance:


These black hexagonal crystals have a melting point of 2870 degrees C, +- 50 degrees C, and boiling point of 6600 degrees C. They can be dissolved in mixed acid nitric acid or hydrofluoric acid as well as in aqua regia.

Tungsten carbide powder technical parameters

WC	Molecular Weight	Carbon Total	No Carbon	O	As	Bi	Ca	Cd
99.95	195.86	6.13-6.18	0.05	0.05	0.001	0.0003	0.0015	0.0005
Cr	Cu	Fe	K	Mn	Na	Mo	P	Pb
0.005	0.0003	0.015	0.002	0.001	0.002	0.003	0.001	0.0003
Sb	Si	Sn	Ti	V	Ni	Co	S	Al
0.0005	0.0015	0.0003	0.001	0.001	0.005	0.01	0.001	0.001

It is simple.


Tungsten Carbide WC Powder


produced?


Utilizing metal tungsten or carbon as raw material, tungsten powder of an average particle size between 3 and 5 mm is mixed dry with a ballmill, then press-molded and put into a graphite resist furnace. Or, you can heat it to 14001700 using an induction furnace. Preferably 15501650. The hydrogen stream produces W2C initially and then continues to react at high temperature to create WC. Or, first, tungsten Hexacarbonyl can be thermally broken down at between 650 to 1000degC in CO, to create tungsten dust, then it is reacted at 1150degC with carbon monoxide to form WC. W2C is possible at higher temperatures than these.

The chemical reaction formula

2W+C = W2C

W + C = WC

Hydrogenated tungsten trioxide (WO3) is then reduced to make tungsten dust. The average particle size for tungsten powder is 35mm. Next, press-form the mixture of tungsten and carbon black under pressure of approximately 1t/cm2 You will need to heat the block of pressurized material in a graphite pan (or crucible) at about 14001700, or more preferably 15501650 in hydrogen stream. This can be done using pure hydrogen and a low dew point (using a graphite resistance furnace) or induction electric furnace. Carburizing will give you WC. Since W2C can be generated from the beginning of the process, the reaction begins around the tungsten particle. Because the reaction temperature is very low, the unreacted and intermediate W2C will remain. The reaction must then be heated to the high temperatures mentioned above. It should be measured according to raw tungsten’s particle size. A reaction can be initiated at temperatures between 1550-1650 degC for large particles that have an average size of 150mm.

The chemical reaction formula

WO3 +3H2 – WA + 3H2O

2WO3 + 3C – 2W + 3CO2

2W+C = W2C

W + C = WC

Applicaciones


Tungsten Carbide WC Powder:


Tungsten caride is used extensively in the manufacture of high-speed cutting tools and furnace structural materials. This is used in the manufacture of cutting tools, wear resistant parts, meltingcrucibles for metallics such as cobalt, copper and bismuth and wear-resistant semiconductor film.

Tungsten carbide is used for super-hard material as well as wear-resistant materials.

Tungsten carbide can be combined with many other carbides to create a strong solution. WC-TiC-Co has been used extensively to create cemented carbide tools.

Tungsten carbide can also be used to modify NbC–C and TaC–C ternary-system carbides. It can decrease the sintering temperature while maintaining excellent performance. It is also used in aerospace.

Tungsten carbide powder (WC) can also be made by using tungsten hydride and graphite at 1400 1600 degrees Celsius. You can make dense ceramic products by either hot pressing or hot isostatically pressing sintering.

Tungsten caride (WC), powder, can also be used in the production of high-capability nano-crystalline, superfine, horniness alloys and petrochemical cracked catalyst.

Tungsten carbide powder storage conditions:


Tungsten carbide powder dispersion and uses effects should be considered. Niobium carbide NbC Powder must be stored in vacuum bags and kept dry in a cool place. NbC powder shouldn’t be exposed to stress.

Packing and Shipping Tungsten carbide WC granules :


We offer many packing options that are dependent on the amount of niobium-carbid NbC powder.

Tungsten carbide WC powder packing:


You can vacuum pack 1kg/bag or 25kg/barrel.

Tungsten carbide WC powder shipping:


After receipt of payment, items may be shipped by air or sea as quickly as they are possible.

Technology Co. Ltd. (), is a trusted supplier and manufacturer of chemical material. We have more than 12 years experience providing high-quality chemicals, Nanomaterials and nitride.

Send us an enquiry if you’re looking for high quality tungsten carbide powder. (brad@ihpa.net)