High Purity Germanium Telluride GeTe Powder CAS 12025-39-7，99.99%| TRUNNANO

About


Germanium Telluride GeTe Powder


:


Germanium Telluride (GeTe), which is a combination of germanium-tellurium is an ingredient of chalcogenide glas. It is semimetallic in conductivity, and has ferroelectric characteristics. Three main types are germanium telluride crystals. They are a(rhomboid and g (orthogonal) at ambient temperature, and b[cubic], halite at high temperature. The main phase in pure GeTe at the ferroelectric Curie temperature is 670 K. Low-temperature superconductor, doped germanium Telluride.

Germanium telluride crystals are a semiconductor of the periodic table WTH group element. Ionic crystals.Trigonometric system face center structure, b. 19G1 lining.Melting point 724 C’.It is a direct bandgap semiconductor with a room temperature forbidden bandwidth of 0.23eV.|19G1 liner. Melting point 724 C’. It is a semiconductor of direct bandgap with an infrared forbidden bandwidth (room temperature) of 0.23eV.|19G1 liner. Melting Point 724 C’.It has a 0.23eV room temperature bandwidth.|19G1 liner.Melting temperature 724 C. It has a narrow bandgap of semiconductors with a bandwidth at room temperatures that is 0.23eV.|19G1 liner.Melting point 724 C’. It’s a direct-bandgap semiconductor having a room temperature prohibited bandwidth of 0.23eV.} It is a narrow bandgap semiconductor with a hole mobility of 7×10-3mZilv “S) degree prepared by melting and recombination method.|This is a semiconductor of narrow bandgap with hole mobility of 7×10-3mZilv. It was prepared using melting and recombination.|The narrow bandgap semiconductor has a hole mobility 7×10-3mZilv. This was obtained by melting and then recombination.|This narrow bandgap semiconductor is prepared through melting and recombination.|It’s a small bandgap silicon with a hole mobility value of 7×10-3mZilv.} This material is useful for detection and infrared emission. Trusted global supplier

Germanium Telluride GeTe Powder

supplier. You can send us an inquiry to learn more about our latest products.

Prices starting at


Germanium Telluride

Anytime.

Germanium Telluride Powder Product Performance :

Technical Parameter of Germanium Telluride geTe powder :

Product Name	MF	Purity	Size of the particle	Molecular Weight	Density	The color of the sky
Germanium Telluride	GeTe	99.99%	-100 Mesh	200.24	6.14 g/cm3	Gray Black

It is simple.


Germanium Telluride GeTe Powder


Produced?


Here are the steps to prepare germanium-telluride:

1) Add some germanium telluride to the organic solution and stir it. This is the ratio of the germanium telluride dust to the volume fraction in the organic solvent. It’s (2100)/(5100). The mass fraction unit is Mg, and volume fraction unit is mL.

(2) Place the mixture in Step 1 into the cell crusher.

(3) After the ultrasonic telluride dispersion, it was centrifuged and the grayish black supernatant was obtained. Supernatant was used to disperse the two-dimensional material germanium Telluride.

Applicaciones


Germanium Telluride GeTe Powder


:


Germanium Telluride is a thermoelectric substance.

For thermoelectric refrigeration, germanium telluride can be used.

Germanium telluride can also be used to make semiconductors and infrared detectors.

GeTe may soon replace dynamic or flash random access memories. It is used widely in optical data storage that is non-volatile, including CDs, DVDs, and Blu-ray. In 1987, Yamada et al. In 1987, Yamada and colleagues. They are faster than Te81Ge15Sb2S2, with a longer transition time and higher optical contrast.

High resistivity between crystalline, amorphous states makes it a suitable candidate for RF switches. A thin layer of GeTe must be applied to the substrate for radiofrequency. Membrane performance can be affected by many factors, including the composition of the precursor layer, seed layer structure, pressure, gas flow rate and precursor bubbling temperatures, as well as substrate.

Germanium Telluride GeTe Pulver Storage Conditions


GeTe powder’s dispersion and usage performance will be affected by the damp reunion. GeTe GeTe should therefore be vacuum packed and kept in cool dry rooms. GeTe powder shouldn’t be exposed to stress.

Packing and Shipping Germanium Telluride geTe Powder :


We offer many packing options that are dependent on the amount of germanium Telluride GeTe.

Germanium-tetrae GeTe powder packaging


You can vacuum pack 100g, 500g, 1kg/bag or 25kg/barrel. Or as you request.

Germanium Telluride GeTe Powder Shipping


Could be shipped by sea or air as soon as payment receipt is received.