Plastic
Nano-silica
Light-transmissive silica can be used to make plastics lighter. It also has smaller particle sizes, making them more malleable. Polystyrene films with silica can be improved in transparency, strength, and toughness. They also have improved waterproofing and anti-aging performances.
Rubber
While rubber has excellent flexibility, it is unable to deliver a satisfactory level of performance. To increase the rubber’s strength, wear resistance and longevity, you will often need to use carbon black in rubber production. The added black is not very high and makes products black due to the carbon. China’s advent of nanoSiO2 has created a basis for the creation of new types of rubber products.
A small amount of nanoSiO2 was added to normal rubber. Its abrasion resistance and flexural strength are significantly improved. The color is also brightening and retains its color well.
Dye
While organic dyes can be brightly colored and offer strong color fidelity, they are less resistant to heat, light, solvent, migration and other environmental factors than inorganic. Surface modification of organic dyes with nano-SiO2 improves not only the anti-aging ability but also the hue, saturation, and brightness to a significant extent.
Ceramics
Utilize
nano-SiO2
Nano-additives that are not traditional can also be added to ceramics. They may play the roles of Nano-particles and second-phase particles. This improves strength, toughness, and also increases hardness and elastic modulus. Nanoparticles are less effective than Nano-additives.
additives.
Use of nano-SiO2 in the composite of ceramic substrates not only enhances density, toughness, smoothness, and sintering temp but it also significantly reduces them. The application of nano-SiO2 to ceramic products, such as ceramic filters, corundum balls and ceramic filters is very important.
Sealant Adhesive
It is important to have a variety of sealants and adhesives available. You need to provide the ideal conditions for product viscosity and fluidity as well as curing speed. Many foreign products have started to incorporate nano-materials in their modification. Nano-SiO2 has been the favorite material. The sealant is usually coated with organic material to hydrophobicize nano-SiO2. The formation of a silica structure quickly occurs. That is, small Nano-SiOX nanoparticles form a network structure which inhibits colloids flow, speeds up curing, and enhances bonding. Because of their tiny size, nano-SiO2 particle’s impermeability and sealing properties are enhanced.
Glass product
FRP products offer the benefits of lightweight, strength and resistance to corrosion, but they are also very hardy and wear-resistant. By ultrasonic dipersion, scientists add nanoSiO2 resin to gel coat resin and compare performance with gel coats without.
nano-SiO2
The original Mohs hardness was 2.2. This is equal to the hardness for plaster. It has been increased to 2.82.9 Grade 3, which is level 3 of the hardness for natural marble. Nanoparticles made of organic polymers and organic polymers are more tough than the original 2.2. The material’s tensile and impact strengths have increased 1 times due to grafting or bonding. Also, heat resistance is greatly enhanced as we have already mentioned.
(aka. Technology Co. Ltd. (aka. It is the
nano-SiO2
Our products are high in purity and fine particles, as well as low levels of impurities. Thank you
Get in touch
if necessary.
Inquiry us